Инженерный центр

Wide-Temperature Reliability Testing for Industrial Displays

Part of:

Wide-temperature reliability testing proves that a display survives real environmental stress, not just nominal operating limits. The test plan has to expose thermal expansion, start-up behavior, brightness drift, and interface failures early enough to be actionable.

High-Brightness TFT LCD Engineering for Outdoor & Industrial HMI

Engineering framework for 800–2500+ nit industrial displays—lux-to-nits targets, backlight stack, thermal derating, optical bonding, EMI at high power, and validation for outdoor kiosks and energy SCADA.

Thermal Management for LCD Modules

Part of:

LCD thermal management is about preserving luminance, lifetime, and color stability inside a sealed system. The key is to treat the panel, backlight, driver, and enclosure as one thermal network rather than isolated parts.

Backlight Design for Industrial TFT LCD and HMI Display Modules

Part of:

A practical engineering guide to industrial TFT LCD backlight design for HMI modules, covering edge-lit vs direct-lit LED topologies, driver IC selection, brightness targets, thermal design, optical uniformity, power budget, dimming and flicker-aware control, and 50k-100k hour reliability planning.

Optical Bonding Design for Industrial HMI

Part of:

Optical bonding is a stack design decision, not a cosmetic upgrade. It changes reflection loss, shock behavior, thermal margin, and serviceability, so it must be justified against the HMI use case and enclosure constraints.

Sunlight-Readable Display Engineering

Part of:

Sunlight-readable displays are defined by usable contrast under direct or reflected daylight, not by panel brightness alone. The engineering target is to balance luminance, optical loss, thermal limits, and EMI so the display remains legible in the field.